learn more icon
  • our brand fangkuai
  • our brand liwei

SZS series gas-fired (oil-fired) steam boiler

Custom designed and fabricated multi-fuel boilers and heat plants.

MENU

boiler supplier

SZS series gas-fired (oil-fired) steam boiler

Custom designed and fabricated multi-fuel boilers and heat plants.

Our boilers are available with a range of fuel options including biomass, solid fuel, gas, liquid fuel and electricity. Respected for our mechanical and project engineering capabilities, we provide comprehensive design, fabrication, installation, and commissioning services to a broad range of industry sectors.

Contact our sales experts
  • Free customization of boilers of different specifications

    Free customization of boilers of different specifications

  • Low operating pressure, low operating cost

    Low operating pressure, low operating cost

  • Up to 15% less energy usage

    Up to 15% less energy usage due to low operation pressure and lacking of moving parts

  • Up to 90% reduced wafer consumption

    Up to 90% reduced wafer consumption due to use of filtrate in filfer back washe

Parameter

  • Thermal capacity : 2-25 t/h
  • Rated thermal efficiency : ≥99%
  • Pressure : ≥1.25MPa
  • Available industries : Chemical industry, food, tobacco, textile, printing and dyeing, feed, medicine, building materials, wine making, rubber, hospital, etc.
SZS series gas-fired (oil-fired) steam boiler
SZS series gas-fired (oil-fired) steam boiler

Introduction

The SZS low-nitrogen condensing gas boiler is a double-drum longitudinal "D" type quick-installed water tube boiler. It consists of an upper and lower drum, a membrane water-cooled wall, a convection tube bundle and a flue gas condensation recovery device. After the fuel is burned in the furnace, the flue gas is discharged into the chimney through the convection tube bundle and the flue gas condensation recovery device.

Advantages

  • The water circulation adopts a combination of forced circulation and natural circulation; the devices in the pot are reasonably arranged, and the forced circulation ensures that the medium in a single circulation loop flows in the tube without causing boiling of steam and water, and the water speed is reasonable, safe and reliable.
  • The diaphragm wall around the Brit SZS low-nitrogen condensing gas boiler naturally forms a large D-type furnace. The furnace volume heat load and cross-sectional heat load are moderate, which is more conducive to low nitrogen emissions, and nitrogen oxides are less than 30mg/Nm°.
  • The smoke velocity in the convection area is designed to be moderate. Two adjacent tubes in the convection tube bundle area are connected with stainless steel flat steel to increase the rigidity of the tubes and prevent vibration when the flue gas is flushed. There are automatic hydrophobic devices at the bottom of the furnace and convection area to prevent acidic water corrosion. The multifunctional explosion-proof door is safe to use and easy to maintain.
  • The furnace is optimally arranged and the radiation heating surface is abundant; the energy saver (condenser) adopts patented technology invented with independent intellectual property rights, taking into account heat transfer efficiency and operating res.
SZS series gas-fired (oil-fired) steam boiler

SZS series gas-fired (oil-fired) steam boiler

Boiler model SZS2 SZS3 SZS4 SZS6 SZS8
Rated evaporation capacity (t/h) 2 3 4 6 8
Rated working pressure (MPa) 2.5 2.5 2.5 2.5 2.5
Saturated steam temperature (℃) 226 226 226 226 226
Superheated steam temperature (℃) /
Feed water temperature (℃) 20 20 20 104 104
Full water capacity (m³) 3.9 4.6 6.9 7.6 9.5
Design thermal efficiency (%) ≥99 ≥99 ≥99 ≥99 ≥99
Exhaust smoke temperature (℃) ≤70 ≤70 ≤70 ≤70 ≤70
design fuel Natural gas, city gas, gas, coke oven gas, 0# light diesel oil, etc.
Maximum shipping weight (t) 9.5 11 13 19 25.4
Body dimensions-L1*W1*H1 (mm) 4200×2600×3300 4800×2900×3300 5300X2900X3000 6200×2900×3700 6700×3200×3700
Overall dimensions after installation-L2*W2*H2 (mm) 4750×4000×3300 5400×4300×3300 5900×4990×4025 6800×4990×4500 8875×5100x4500
Interface diameter (mm) main steam valve DN65 DN80 DN80 DN125 DN150
safety valve 2xDN40 2×DN40 2×DN40 2×DN65 2×DN80
Inlet valve DN40 DN40 DN40 DN40 DN50
Drain valve DN40 DN40 DN40 DN50 DN50
Boiler model SZS10 SZS15 SZS20 SZS25 SZS30 SZS35
Rated evaporation capacity (t/h) 10 15 20 25 30 35
Rated working pressure (MPa) 1.25/1.6/2.5 1.25/1.6/2.5 1.25/1.6/2.5 1.25/1.6/2.5 1.25/1.6/2.5 1.25/1.6/2.5
Saturated steam temperature (℃) 194/204/226 194/204/226 194/204/226 194/204/226 194/204/226 194/204/226
Superheated steam temperature (℃) ≤450
Feed water temperature (C) 104 104 104 104 104 104
Full water capacity (m³) 10.2 13 14.2 16.4 20 21.2
Design thermal efficiency (%) ≥99 ≥99 ≥99 ≥99 ≥99 ≥99
Exhaust smoke temperature (℃) ≤70 ≤70 ≤70 ≤70 ≤70 ≤70
design fuel Natural gas, city gas, gas, coke oven gas, 0# light diesel oil, etc.
Maximum shipping weight (t) 30 34 46 50 60 65
Body dimensions-L1*W1*H1 (mm) 6900×3300x3700 ol 7900x3660x38508 8900×4000×3900 10050×4200×4100 11700×4200×4200 12000×4200×4200
Overall dimensions after installation-L2*W2*H2 (mm) 9075x5295x4500 9320×6400x4725 11000×6200×4760 11360×6855×4590 13570×6365×5015 15480×6845x6070
Interface diameter (mm) main steam valve DN150 DN200 DN200 DN200 DN250 DN250
safety valve 2xDN80 DN80、DN100 2xDN100 DN100+DN150 2×DN150 2xDN150
Inlet valve DN50 DN65 DN80 DN80 DN80 DN80
Drain valve DN50 DN50 DN50 DN50 DN50 DN50

*The above data are for reference only. For specific information, please refer to the actual product and product manual. Unless otherwise specified, the right to interpret the data involved in this website belongs to DABONN.

*For other model details, please contact us.