Parameter

• Thermal capacity : 1-20 t/h
• Rated thermal efficiency : 103.5%
• Pressure : ≤2.5MPa
• Available industries : Chemical industry, food, tobacco, textile, printing and dyeing, feed, medicine, building materials, wine making, rubber, hospital, etc.

Introduction

The skid-mounted gas boiler is an integrated boiler system that collects all auxiliary equipment such as the boiler body, control system, water softener, soft water tank, feed water pump, steam tank, fuel tank, instrument valves, etc. into one container to realize the entire boiler equipment mobility. The boiler only needs to be connected to the power supply to operate fully automatically. The instrumentation and control systems of the boiler are all completed in the container.

Advantages

• The boiler adopts mature angle tube technology, which makes the water circulation safer and has no special requirements for water quality; FIR low-nitrogen combustion technology is safer to operate; it adopts an independent dual protection circuit and PLC controller to ensure independent safety and redundancy design; the condenser is made of 316L material. There is no risk of condensate corrosion, making operation safer.
• FIR low-nitrogen combustion technology has higher burner efficiency and smaller exhaust heat loss. It can save 4-6m³ of natural gas per ton of steam compared with ordinary condensing boilers. The unique design of steam drum internal parts has better steam-water separation effect, can achieve steam dryness ≥99%, and the operation is more energy-saving. Fast steam production (steam can be produced in 5 minutes when cold).
• Full water-cooled wall large furnace design, equipped with FIR low-nitrogen combustion technology, volumetric heat load 500KW/m, more uniform temperature field distribution, reducing the generation of rapid nitrogen oxides, lower emissions, 20-100% full load NOx≤28mg /Nm.
• We are "boiler, furnace, control" integrated integrated skid-mounted factory. On site, you only need to connect water, electricity, and gas (natural gas) to the designated interface on the boiler! Just connect the steam pipe and sewage pipe to the user.